| T3 or T4 Standard Exhaust Manifold Currently Available and IN-STOCK! $830.00 Shipped |
 | |  | |  | |  | |  |
| JHRacing.net JakeH@JHRacing.net |
*IMPORTANT!*
I am making these manifolds in an effort to further assist people who do not have the means (or experience) to make
these themselves. I have been racing and fabricating long enough to have found what works, and what does not. This is
the design, material, and quality I will be using on my personal car when I push for the 8's.
I am not going to compare or attempt to compete with any other person or business. So, PLEASE! Do not call or email
me asking what I think of "so and so's" manifold.
"IF" I provide any sort of additional discount, it will be at my discretion. I would be willing to give a discounted price on
multiple item orders. If you have a multiple item order you would like to place, please email me and we can discuss the
details.
These are available as an "OFF-ROAD-USE" Product ONLY! I am not making them for use on the street. Any injury
or damage that may relate to this product, or be caused by the misuse of this product, will be the responsibility of the
owner and/or driver. JHRacing and/or any of its owners or affiliates are NOT to be held liable for any misuse of this
product. By agreeing to purchase this product, you agree to and accept these as "terms and conditions". Any non
off-road use of this product is also at the risk of the driver/owner.
ALL returns are subject to a minimum restocking fee of 25%. If the product is damaged (physically or cosmeticly) the
refund will be denied. Any refund must be requested within 90 days of the original purchase date.
WARRANTY INFORMATION: Lifetime "limited" warranty. JHRacing will warrant fabricated exhaust manifolds
against improper workmanship, and cracking to the original purchaser. JHRacing reserves the right to refuse warranty
claims on items which were misused or improperly installed. There is absolutely NO reimbursement for any laybor
costs related to a warrantable defect. No other components relating to the manifold failure are covered by this
warranty, NO exceptions. The installation and operation of JHRacing products are at the liability of the owner/
operator.
Warranty Cliff Notes: I don't worry about these manifolds failing and neither should you!
I am making these manifolds in an effort to further assist people who do not have the means (or experience) to make
these themselves. I have been racing and fabricating long enough to have found what works, and what does not. This is
the design, material, and quality I will be using on my personal car when I push for the 8's.
I am not going to compare or attempt to compete with any other person or business. So, PLEASE! Do not call or email
me asking what I think of "so and so's" manifold.
"IF" I provide any sort of additional discount, it will be at my discretion. I would be willing to give a discounted price on
multiple item orders. If you have a multiple item order you would like to place, please email me and we can discuss the
details.
These are available as an "OFF-ROAD-USE" Product ONLY! I am not making them for use on the street. Any injury
or damage that may relate to this product, or be caused by the misuse of this product, will be the responsibility of the
owner and/or driver. JHRacing and/or any of its owners or affiliates are NOT to be held liable for any misuse of this
product. By agreeing to purchase this product, you agree to and accept these as "terms and conditions". Any non
off-road use of this product is also at the risk of the driver/owner.
ALL returns are subject to a minimum restocking fee of 25%. If the product is damaged (physically or cosmeticly) the
refund will be denied. Any refund must be requested within 90 days of the original purchase date.
WARRANTY INFORMATION: Lifetime "limited" warranty. JHRacing will warrant fabricated exhaust manifolds
against improper workmanship, and cracking to the original purchaser. JHRacing reserves the right to refuse warranty
claims on items which were misused or improperly installed. There is absolutely NO reimbursement for any laybor
costs related to a warrantable defect. No other components relating to the manifold failure are covered by this
warranty, NO exceptions. The installation and operation of JHRacing products are at the liability of the owner/
operator.
Warranty Cliff Notes: I don't worry about these manifolds failing and neither should you!
Key Features Include:
-NOW AVAILABLE AS T4!
-Use with T3 turbos, large or small! Everything all the way from quick spooling 300hp turbos, up to the
large "S-Cover" style turbochargers.
-Many different wastegate flanges available. Request at time of purchase.
-4-1 Style (x-point) merge collector greatly increases spool time. CNC machined for consistency and
unbeatable quality. This design is extremely superior to the hand made transitions which basically joint
one tube into the other.
-Great fitting, extremely high quality manifold and design!
-Thick .109" wall, Forged, Stainless Steel tubing is utilized for ultimate heat retention and manifold
longevity. Many competitors use only .065".
-CNC Flanges not only provide unsurpassed quality, but have a transition built in (at the head) for high
velocity, low resistance exhaust flow.
-Thick flanges greatly reduce the possibility of warping.
-Equal length design allows exhaust pulses to enter the turbo one after another. This increases spool and
turbo longevity.
-Fits DSM 1G and 2G cars 89-99 4G63
-MADE IN THE USA!
-NOW AVAILABLE AS T4!
-Use with T3 turbos, large or small! Everything all the way from quick spooling 300hp turbos, up to the
large "S-Cover" style turbochargers.
-Many different wastegate flanges available. Request at time of purchase.
-4-1 Style (x-point) merge collector greatly increases spool time. CNC machined for consistency and
unbeatable quality. This design is extremely superior to the hand made transitions which basically joint
one tube into the other.
-Great fitting, extremely high quality manifold and design!
-Thick .109" wall, Forged, Stainless Steel tubing is utilized for ultimate heat retention and manifold
longevity. Many competitors use only .065".
-CNC Flanges not only provide unsurpassed quality, but have a transition built in (at the head) for high
velocity, low resistance exhaust flow.
-Thick flanges greatly reduce the possibility of warping.
-Equal length design allows exhaust pulses to enter the turbo one after another. This increases spool and
turbo longevity.
-Fits DSM 1G and 2G cars 89-99 4G63
-MADE IN THE USA!
